do not scale from this print .050 ref 1.27 .440 11.18 ref .249 6.32 ref "a" "a" isdf-xx-d fig. 1 -s: single end (sfsd-10-28-xx-xx.xx-s shown) ** ** + .015[0.38] ref (no of pos x .050[1.27]) .080 ref 2.03 .120 ref 3.05 .145 ref 3.68 .250 6.35 ref .050 1.27 ref c l 02 01 n (see table 2) n-1 (see table 2) sfsdx-xx-xxx-xx-xx.xx-xx-xxx no of positions -05, -07, -10, -15, -20, -25, -30 -35 -40, -45, & -50 (per row) available as standard -02 thru -50 available as aso plating specification -f: flash selective -l: light selective -s: selective -h: heavy gold -g: light gold -gf: flash gold (see table 4, sheet 3) wire gauge (awg) -28, -30 end option (end option combinations not available) -nus: notch up, straight (pin 1 to pin n-1) -nds: notch down, straight (pin 1 to pin 2) -nux: notch up, crossed (pin 1 to pin n) -ndx: notch down, crossed (pin 1 to pin 1) -nxx option (end 2) (only available with -d, -dl, -dr) specify in inches (single end: 03.00 inch [76.2mm] minimum, double end: 03.25 inch [82.6mm] minimum) assembled length -s: single end -d: double end (must choose from -nxx options) -sl: single ended with friction lock (see sheet 2, fig. 3) (only available on -10 thru -30 position) -dl: double ended with friction lock (see sheet 2, fig. 4) (only available on -10 thru -30 position) (must choose from -nxx options) -sr: single ended with retention latch (see sheet 4, fig. 5)(use sub-im-ltc-07-01-n) (only available on -05 thru -30 pos) -dr: double ended with retention latch (see sheet 4, fig. 6)(use sub-im-ltc-07-01-n) (only available on -05 thru -30 pos) (must choose from -nxx options) color code: leave blank for all black wire c: color coded wire, see color sequence table, sheet 4 (not available with teflon option) (see note 8) assembled length: l section "a"-"a" c1 dwcx-xx-xx-300 ** not released for production xx.xx .125[3.18] assembled length: fig. 2 -d: double end (sfsd-10-28-xx-xx.xx-d-nus shown) (same as fig. 1, unless otherwise stated) c2 c c4 * * * do not design in. for existing customers only. c3 * teflon cable option ** -t: teflon (leave blank for standard pvc insulation) sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .050[1.27] socket discrete cable assembly by: sfsdx-xx-xxx-xx-xx.xx-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 5/5/2005 4 1 sheet scale: 2:1 insulator: lcp, color: black contact: becu cable insulation: see callout wire: tinned copper f:\dwg\misc\mktg\sfsdx-xx-xxx-xx-xx.xx-xx-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pullout force: 3.0 lbs [13.3 n]. 3. contact must be inserted until retention feature locks into place. 4. all finished goods are to be electical tested including hi-pot test at 1000 volts dc. 5. tinned copper wire is rohs compliant. 6. parts to be layer packaged. 7. end of discrete wire must be in the range after crimp. 8. for lengths less than 12 in, tolerance shall be +/-.125. for other lengths, tolerance shall be +/-2%. 9. note deleted. 10. see dwlx-08-xx-x-xx.xx-xx-xx for crimp dimensions. 11. 3lb min wire crimp strength for -30 awg and 4.5lb min wire crimp strength for -28 awg. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l
notch end 2 -nus (end 2 notch up, cable straight) (pin 1 to pin n-1) notch end 1 n n-1 02 01 (see table 2) 01 02 n-1 n (see table 2) notch end 2 -nds (end 2 notch down, cable straight) (pin 1 to pin 2) notch end 1 01 02 n-1 n (see table 2) 01 02 n-1 n (see table 2) notch end 2 -nux (end 2 notch up, cable crossed) (pin 1 to pin n) notch end 1 01 02 n-1 n (see table 2) 01 02 n-1 n (see table 2) notch end 2 -ndx (end 2 notch down, cable crossed) (pin 1 to pin 1) notch end 1 01 02 n-1 n (see table 2) 01 02 n-1 n (see table 2) fig. 3 -sl: single end retention lock (sfsdx-10-28-xx-xx.xx-sl shown) (same as fig. 1, unless otherwise stated) isdf-xx-d-l fig. 4 -dl: double end retention lock (sfsdx-10-28-xx-xx.xx-dl-nus shown) (same as fig. 1, unless otherwise stated) isdf-xx-d-l sheet of .050[1.27] socket discrete cable assembly by: sfsdx-xx-xxx-xx-xx.xx-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 5/5/2005 4 2 sheet scale: 1:0.571429 f:\dwg\misc\mktg\sfsdx-xx-xxx-xx-xx.xx-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l
.095 (typ) 2.41 - .55[14.0] assembled length -d: double end dwcx-xx-xx-300 in-process 1 "b" "b" "c" "c" in-process 2 (typ both end for -d: double end) see tables 3 & 4 "b" "a" .0010[0.025] section "b"-"b" scale 8 : 1 c4 "d" "c" l section "c"-"c" scale 8 : 1 c5 .033 ref 0.84 .203 5.16 ref .400 10.16 ref 'd' see note 7 detail 'd' scale 8 : 1 2 x assembled length -s in-process (sfsdx-10-28-xx-xx.xx-d-nus shown) (same as fig. 1, unless otherwise stated) * * * ** ** sheet of .050[1.27] socket discrete cable assembly by: sfsdx-xx-xxx-xx-xx.xx-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 5/5/2005 4 3 sheet scale: 2:1 f:\dwg\misc\mktg\sfsdx-xx-xxx-xx-xx.xx-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l
+ .145[3.68] ref (no of pos x .050[1.27]) .113 2.86 .083 (typ) 2.11 isdf-xx-d-r fig. 5 -sr: single end with retention latch (sfsdx-10-28-xx-xx.xx-sr shown) (only available on -05 thru -30 pos) (same as fig. 1, unless otherwise stated) c6 c7 .080 ref 2.03 + .145[3.68] ref (typ) (no of pos x .050[1.27]) .113 2.86 .083 (typ) 2.11 isdf-xx-d-r fig. 6 -dr: double end with retention latch (sfsdx-10-28-xx-xx.xx-dr shown) (only available on -05 thru -30 pos) (same as fig. 1, unless otherwise stated) c8 c9 .080 ref 2.03 sub-im-ltc-07-01-n sheet of .050[1.27] socket discrete cable assembly by: sfsdx-xx-xxx-xx-xx.xx-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 5/5/2005 4 4 sheet scale: 4:1 f:\dwg\misc\mktg\sfsdx-xx-xxx-xx-xx.xx-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l
|
